One Point Ionizer From Haug North America

One Point IonizerOne Point Ionizer from Haug North America

One-Point-Ionizer

Cleaning and maintenance

Technical Data

Technical illustration
 
One-Point-Ionizer:

We developed the One-Point-Ionizer for the neutralization of smallest parts. Emitting positive and negative ions, this unit neutralizes reliably electrostatic spot charges (fig.1). 

This ionizer is perfectly suited for mounting in places where there is little room. The plug of the electrode must simply be connected to the high-voltage transformer and the unit can be quickly set into operation without tools.

The One-Point-Ionizer has proven its value repeatedly in daily use, e.g. in the medical techniques. This unit can also be equipped with compressed air.

One Point Ionizer
One Point Ionizer

Attention: The pin carries high voltage and must not be touched while in operation.

Cleaning and maintenance:

We recommend regular cleaning of the electrode as dirt may cause considerable loss of efficiency.

Technical Data One-Point-Ionizer:
 
Order no. 03.8002.0V3
Temperature from -150 °C up to +50 °C
Diameter 16 mm
Length 31 mm
High-voltage cable Non-detachable high-voltage cable connected to the bar. 
Coaxially shielded with high-voltage plug
Suitable power packs all HAUG power packs according to their specifications

We reserve the right to technical modifications!

Suitable power packs:
 

EN SL (230 V),  Order-No.: 01.7780.000 (115 V),  Order-No.: 01.7781.000
EN SL LC  (230 V),  Order-No.: 01.7780.100 (115 V),  Order-No.: 01.7781.100
EN 8 (230 V),  Order-No.: 01.7757.000 (115 V),  Order-No.: 01.7756.000
EN 8 LC (230 V),  Order-No.: 01.7757.100 (115 V),  Order-No.: 01.7756.100
Multistat (230 V),  Order-No.: 01.7760.000 (115 V),  Order-No.: 01.7759.000

Max. connected load (ionizing unit incl. high-voltage cable):
 

EN SL approx.   5 m
EN 8 approx. 15 m
Multistat  approx. 15 m

Technical illustration:

One-Point-Ionizer, TI01


Site Design - Panther Marketing & Design
Back to Top